What are the usage instructions for the double cone rotary vacuum dryer?
1. The shell must be grounded to ensure effective use
2. Follow the instruction manual for standardized operation
3. The equipment needs to be cleaned and maintained regularly
4. When cleaning, maintaining, and servicing equipment, the power must be cut off
5. Steam or hot water, heat transfer oil: Steam or hot water, heat transfer oil are used as thermal energy, and the interlayer design pressure is 0.3Mpa. Overpressure use is prohibited. When turning on the heat source, it needs to be turned on slowly.
6. Conventional motors require a three-phase four wire system of 380V/50Hz
7. Before use, check whether the connections of all parts of the machine are loose. If they are loose, tighten them.
8. Lubricating oil (grease) should be added to the transmission parts and bearings as required.
9. Before use, it is necessary to conduct an empty test run and check whether the instruments, buttons, and indicator lights on the control panel are normal.
10. Drive and check whether the transmission system operates flexibly and whether the noise meets normal requirements.
11. Connect the heat source, start the equipment and vacuum pump, check for leaks, and if any abnormalities are found, adjust the calibration appropriately
12. When feeding, it is not allowed to exceed the prescribed feeding range
13. When using the equipment, personnel should be within a safe range to prevent mechanical injury
14. When using the equipment, it is necessary to regularly check the drainage, pressure, and other conditions to ensure the normal operation of the equipment
15. Flammable and explosive materials are prohibited from being used on this machine.
