1. Non contact drying conductive drying (indirect drying, with no contact between the heat medium and the material).
2. The degree of sludge drying can be flexibly adjusted according to customer requirements.
3. Applicable to all sludge disposal schemes.
4. The low oxygen content in the equipment eliminates the possibility of dust explosion.
5. The equipment has a large sludge load, which ensures smooth operation even if the feeding is uneven.
6. Durable and sturdy construction.
7. The rotor speed is low, 1-5 r/min, with minimal wear.
8. The design is very compact, with a large heat transfer area and a small equipment footprint.
9. Less maintenance, good continuous operation, and can operate day and night.
10. The installed power of the equipment is small and the operating cost is low.
11. The upper box can be fully opened for easy maintenance and repair.
12. Heating method can be selected according to on-site requirements (thermal oil, steam, hot water, etc.)
13. Can be designed for production lines and used in conjunction with other equipment
14. When the equipment is running, it is completely sealed, with less odor generation and a good working environment
15. When designing the box jacket, coil type and honeycomb type can be designed
16. Can be used for semi drying process or fully drying process
The horizontal disc dryer produced by Binda Drying has stable performance, and equipment materials, electrical controls, auxiliary equipment, etc. can be flexibly selected. Binda Drying will help you successfully put it into production!
